Product size of thermoplastic pavement road markings tape
Product Parameter of thermoplastic pavement road markings tape
Smooth surface stain resistant
(other sizes can be cut according to your request)
33m or 50m/roll
black / white / yellow / red / blue
Detail images of thermoplastic pavement road markings tape
Product Introduction of thermoplastic pavement road markings tape
1.The surface of it is covered with good reflective glass beads, so the driver is easy to see the reminders in order to improve the safety of driving.
2.The surface of road anti-reflective tape contains resin composition and synthetic rubber composition, so it is very wearable and durable.
3.When the tape is used, it is with powerful adhesive that the pressure is sensitive so that it can be quickly bonded, which can be well attached to the surface of a variety of materials.
4.The surface is with anti-fouling ingredients, and stains are not stacked on the surface of product, which won’t influence the effect because of the dust.
5.The construction of marking tap on the highway is simple and convenient, which don’t need the traditional heating process and complex construction equipment. So it is low cost and environmental safety.
6.According to your needs, it can be designed into a variety of patterns and colors to combine.
7.It can be widely used in traffic signs, symbols and text of roads, urban roads, docks, airports, toll stations, parking and so on.
Road preformed marking tape has been widely used in developed countries, especiallythe markers line is with its unique advantages when it is in the production of patterns, text and other complex roadtraffic marking.
Some steps of construction
1. For complex patterns and text, you should premade the molding in the factory and take the product that had made well to the construction site.
2. The construction on the site:
A. You ensure that there is no rain and water two days before the construction in order to ensure that the road
surface is dry.
B. Before the construction, at first you should blockade the construction road to ensure that the construction site is without other personnel and vehicles to be through.
C. In order to ensure that the road is without dust and other debris, you should clean the construction road.
D. You should locate and mark on the target pattern.
E. You should cut the material into the desired length or pattern.
F. You should make the pattern that had cut well and that have premade well paste in the set position.
G. With the weight to press the pattern that is affixed well several times, it will ensure a better paste effect.
H. After the completion of the construction, you had better ensure that there is without vehicles and pedestrians to be through within 5-8 hours, which will achieve the best paste effect.
Product Uses of thermoplastic pavement road markings tape
Shipping of thermoplastic pavement road markings tape
We're Here to Help
Shaanxi Yiyuan Traffic Technology Engineering Co.,Ltd
Address: No.5, Production Road, West Thermal Power Plant, West Section Of Hongguang Road, Weiyang District, Xi'an, Shaanxi, China