Hot melt marking is a kind of road marking. Road marking is divided into: hot melt marking, cold paint standard room temperature, color non-slip markings, anti-skid anti-reflective marking lines and preformed marking. Hot melt marking is currently the most widely used road marking our a target line. His short construction time, high wear resistance, low cost.
Road traffic marking is mainly located on the road surface, subject to the sun and rain, snow and ice frozen, suffered from vehicle impact wear, so its performance has strict requirements. First of all require the drying time is short, easy to operate to reduce traffic interference; followed by the requirements of reflective ability, bright colors, strong reflection, so that day and night have good visibility; third, should have skid resistance and wear resistance, To ensure traffic safety and service life.
Road marking, factory road marking, factory parking, underground garage underline, school road marking, residential plot line and other construction projects, divided into cold paint crossed and hot melt crossed two.
Special road use of cold paint, artificial spraying, uniform thickness, color and clarity.Including parking spaces, the prohibition of yellow line area, channel line, diversion belt, guide arrow and so on.
Hot melt line construction process:
1, reflective hot melt marking, using glass beads primer, petroleum resin hot melt coating.
2, the paint on the hot melt machine heating, melting temperature is controlled at 180 degrees Celsius to 220 degrees, and fully stirred for about 10 minutes after the coating.
3, mark the location and measurement, according to the design icon position and graphics, and then coated in the marked map primer.
4, after the primer dry hot melt coating can be carried out at the same time painted reflective glass beads, increased night identification, marking thickness 1.5- 1.8MM.
1. Paste reflective reticle, is the use of polymer materials forming the back of the material coated paper, touch the road surface coated with a layer of pollution-free roads. And sticky solid glue.
2. No spraying machinery, hot melt machinery, direct adhesive paste on the ground, can be opened to traffic, field construction is simple, durable, marking the edge of the neat, easy to cut map for the word, the average cost of long-term use is lower than all the reticle paint price. Highway one, two highways, urban roads, parking, airports, port terminals, stadiums, stadiums, factories, hotels, parking lot are applicable.
3. Return to the reflective performance of the standard tape, glass beads spread on the surface of the tape, the night lights shine back to the light irradiation, surface wear after a few months. Beads in the substrate, the night light irradiation back to the light reflection, the surface after a few months the car wasted, the substrate beads continue to reflective.
4 logo marking the most suitable construction. Standard with the standard tape: commonly used (m) 0.4 * 14 (white). 0.15 * 12, (white) 0.10 * 12, 0.15 * 10 (yellow)
5. Arrows, text, patterns, symbols can be good arrow in the room, immediately paste on the road can shorten the construction time, traffic opened to reduce traffic congestion.
6. Durable, non-slip, melt-resistant, wear resistance, weather resistance, impact resistance, cold resistance, heat resistance are used in China.
The Shaanxi Yiyuan Traffic Technology Engineering Co.Ltd.
Address: No. 5, Production Ro ad, West Thermal Power Plant, West Section Of Hongguang Road, Weiyang District , Xi'an,Shaanxi.China
We're Here to Help
Shaanxi Yiyuan Traffic Technology Engineering Co.,Ltd
Address: No.5, Production Road, West Thermal Power Plant, West Section Of Hongguang Road, Weiyang District, Xi'an, Shaanxi, China